• ZMS Cable Logo
    SEARCH:
    Email & Msn: info@zmscable.com  Tel: +86 371-67829-333
    无标题文档 GOTOP
    Position: Home >> overhead cables >>0.6/1KV AAC/ACSR XLPE/PE Insulation ABC cable

    0.6/1KV AAC/ACSR XLPE/PE Insulation ABC cable

    Bookmark Print ZMS E-mail 0.6/1KV AAC/ACSR XLPE/PE Insulation ABC cable 



     

    1. Application

    0.6/1KV AAC/ACSR XLPE/PE Insulation ABC cable is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. The cables are designed for aerial power lines and room entrance wires with AC rated voltage 1kV and below..

     2. Standard:

    GB/T12527,1179 ,IEC60502 ,NFC 33-209 ,BS 7870 ,ANSI/ICEA S-76-474 AS/NZS 3560.1 etc.
    ZMS cable can also design and produce for special application requirement.
    3.Products Type

    Chinese Type
    Short time Description Application
    Copper conductor Aluminum conductor
    JKV JKLV,JKLHV Covered line wire

    Service drop cable

    Secondary UD cable
    PVC insulated aerial cables For aerial power transmission application
    JKY JKLY,JKLHY PE insulated aerial cables
    JKYJ JKLYJ,JKLHYJ XLPE insulated aerial cables
    JKLGYJ Steel reinforced aluminium wire with XLPE insulated aerial cable For aerial power transmission application
    For aerial power transmission application,able to bear moderate pulling force.
    4.Production Range
    Rated Voltage U0/U(Um) (kV) : 0.6/1(1.2) No. of cores : 1 , 2 , 3, 4 , 5, 3+1 , 4+1 ,3+2
    Nominal cross-section(mm2): 10~240
    5.Construction
    Phase conductor :
    Round stranded or compacted 1350-H19 aluminium or Copper conductor ,AAAC,ACSR
    Neutral or messenger conductor :
    Round stranded or compacted 6201 aluminium alloy or AAC ,,ACSR
    Street lighting conductor:
    Round stranded or compacted Aluminium conductor
    Insulation :
    LDPE ,HDPE,XLPE ,PVC ( UV-resistant)
    Note: The above provisions can be changed as order
    6.  Working conditions aerial insulation power cable
    1) Rated voltage: 0.6kV/1Kv
    2) The tallest working temperature of the cable conductor; XLPE insulation cable: 90°C;
    PE insulation cable: 75°C;
    3) During having a short (lasting less than 5 seconds) the maximum temperature;
    XLPE insulated cables is 250°C;
    PE insulated cable is 150°C
    4) During the cable lying, the ambient temperature must be above-20°C
    5) Bending radius allowance of the cable;
    A)1Kv aerial insulation power cable:
    It should be no less than 4D for the cable with outer diameter less than 25mm;
    It should be no less than 6D for the cable with outer diameter of 25mm or more;
    B) 10kV aerial insulation power cable:
    Single core cable: 20 (D+d)±5%mm;
    Multi-core cable:15 (D+d)±%mm
    Formula inside: D-Actual cable outer diameter;
    d-Actual conductor outer diameterl


    Please feel free to fill out this Form, or send a email for inquiry.

    * Name     * Country
    * E-mail     * Company
    *Message: